17-11-2020, 14:50
(This post was last modified: 17-11-2020, 15:06 by CuckooBlue.)
Hi Joseph and thank you for your quick reply.
Our vacuum chamber is some distance from my workstation and I would like to be able to remotely monitor the motor temperatures and vacuum levels as our expereiments progress (I also have an NGC3 gaugue controller). Modbus would be my prefered protocol.
Will your existing windows application still be available with a future Ethernet implementation?
Thanks
CB
Our vacuum chamber is some distance from my workstation and I would like to be able to remotely monitor the motor temperatures and vacuum levels as our expereiments progress (I also have an NGC3 gaugue controller). Modbus would be my prefered protocol.
Will your existing windows application still be available with a future Ethernet implementation?
Thanks
CB